FC-to-ESC connection cables
A matching connector is not enough for controller-to-ESC wiring. Pin assignments must be checked for each board revision.
What to specify
Use these fields to describe your requirement. Values are supplied by the buyer or the responsible integrator; this reference does not list an in-stock SKU or a universally compatible replacement.
| Requirement | Information to include |
|---|---|
| Controller | Board model and revision |
| ESC | Board model and revision |
| Connectors | Family, pitch and orientation |
| Assignment | Power, ground, signals and telemetry |
| Length | Route and strain relief |
| Test | Pin-to-pin and shorts inspection |
Sample and acceptance review
Use the manufacturers’ pinout documents and approve a cable drawing before a batch order. Label the intended board pair.
A common purchasing mistake
Never assume a cable included with one stack is interchangeable with another stack.
Related purchasing decisions
A repair-shop checklist for stack cables
FC-to-ESC cables are easy to confuse because small connectors look alike. Every cable should be tied to an approved board pair and pinout.
Technical reading
The following independent resource provides technical context. The request fields and review notes on this page are AVDORS editorial procurement guidance, not a quotation of product specifications or a claim of manufacturer authorization.
Holybro hardware documentation